Configuring the Server Farm
4
Select Internet Protocol (TCP/IP) in the Microsoft Loopback Adapter Properties window.
Select "Internet Protocol
(TCP/IP)".
5
Click the Properties button.
6
Click the Use the following IP address radio button in the Internet Properties (TCP/IP) Properties
window.
Select "Use the following
IP address" radio button.
7
Enter the Virtual IP (VIP) address in the IP Address window.
Note. Use the same subnet mask as for the physical IP interface.
8
Click the OK button.
page 34-14
OmniSwitch 6800/6850/9000 Network Configuration Guide
Configuring Server Load Balancing
Click the "Properties" button.
Enter the VIP
address here.
Click "OK" when
done.
March 2008