Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual page 309

Configuring Dynamic Link Aggregation
Note. As an option, you can verify your dynamic aggregation group settings with the
command on either the actor or the partner switch. For example:
-> show linkagg 2
Dynamic Aggregate
SNMP Id
Aggregate Number
SNMP Descriptor
Name
Admin State
Operational State
Aggregate Size
Number of Selected Ports : 8,
Number of Reserved Ports : 8,
Number of Attached Ports : 8,
Primary Port
LACP
MACAddress
Actor System Id
Actor System Priority
Actor Admin Key
Actor Oper Key
Partner System Id
Partner System Priority
Partner Admin Key
Partner Oper Key
You can also use the
"Displaying Dynamic Link Aggregation Configuration and Statistics" on page 17-32
tion on show commands.
An example of what these commands look like entered sequentially on the command line on the actor
switch:
-> lacp linkagg 2 size 8 actor admin key 5
-> lacp agg 1/1 actor admin key 5
-> lacp agg 1/4 actor admin key 5
-> lacp agg 3/3 actor admin key 5
-> lacp agg 5/4 actor admin key 5
-> lacp agg 6/1 actor admin key 5
-> lacp agg 6/2 actor admin key 5
-> lacp agg 7/3 actor admin key 5
-> lacp agg 8/1 actor admin key 5
-> vlan 2 port default 2
OmniSwitch 6800/6850/9000 Network Configuration Guide
: 40000002,
: 2,
: Dynamic Aggregate Number 2 ref 40000002 size 8,
: ,
: ENABLED,
: UP,
: 8,
: 1/1,
: [00:1f:cc:00:00:00],
: [00:20:da:81:d5:b0],
: 0,
: 5,
: 0,
: [00:20:da:81:d5:b1],
: 0,
: 5,
: 0
show linkagg port port command to display information on specific ports. See
Quick Steps for Configuring Dynamic Link Aggregation
March 2008
show linkagg
for more informa-
page 17-5