Alcatel-Lucent OmniSwitch 6800 Series Network Configuration Manual page 548

Hide thumbs Also See for OmniSwitch 6800 Series:

Table of Contents

Setting Up Authentication Clients

From this window you may install the client at the default destination folder shown on the screen or

you may click the Browse button to select a different directory. Click on the Next button. The software

loads, and the following window displays.

This window gives you the option of restarting your PC workstation now, or later. You cannot use the

AV-Client until you restart your computer. If you decide to restart now, be sure to remove any disks from

their drives. Click the Finish button to end the installation procedure.

OmniSwitch 6800/6850/9000 Network Configuration Guide

Configuring Authenticated VLANs