Diagnosing Switch Problems
Agent Version
Agent IP
Note. For more information about the displays that result from these commands, see the OmniSwitch CLI
Reference Guide.
Deleting a sFlow Session
To delete a sFlow receiver session, use the release form at the end of the
entering sflow receiver, followed by the receiver index and release. For example, to delete sFlow receiver
session 6, enter:
-> sflow receiver 6 release
To delete a sFlow sampler session, use the no form of the
sampler, followed by the instance ID number, the slot number of the port to delete, a slash (/), and the
port number of the port, enter:
-> no sflow sampler 1 2/3
To delete a sFlow poller session, use the no form of the
poller, followed by the instance ID number, the slot number of the port to delete, a slash (/), and the port
number of the port, enter:
-> no sflow poller 3 1/1
OmniSwitch 6800/6850/9000 Network Configuration Guide
= 1.3; Alcatel-Lucent; 6.1.1
= 127.0.0.1
sflow receiver
sflow sampler
command by entering no sflow
sflow poller
command by entering no sflow
March 2008
sFlow
command by
page 35-33