Input/Output Patchbay; Default Setting Of The Input/Output Patchbay - Roland M-200i V-mixer Owner's Manual

Input/output patchbay

Default setting of the input/output patchbay

Default settings of the input patchbay
When the M-200i is in its default state, the input patchbay is set as follows:
Input channel
CH1–24
CH25–26
CH27–28
CH29–30
CH31-32
You can also use the EFFECTS screen to patch an effect output to a channel. For details, refer to "Setting the input source for an effect" (p. 66).
You can also use the RECORDER screen to patch a USB memory recorder output to a channel. For details, refer to "USB memory recorder
output-destination settings" (p. 79).
Default settings of the output patchbay
When the M-200i is in its default state, the output patchbay is set as follows:
Output port
REAC OUT1–6
OUT7–8
OUT9–40
ASSIGNABLE OUTPUT 1-8
9-10
MAIN OUTPUT L/R
AES/EBU OUT L/R
DOCK OUTPUT L/R
86
Input port
INPUT1–24
FX3 OUT L,R
FX4 OUT L,R
DOCK INPUT L,R
PLAY L,R
Output
AUX1–6
MAIN L,R
CH1–32 DIRECT OUT
AUX 1-8
MONITOR L,R
MAIN L,R
MAIN L,R
MAIN L,R