Operation Procedures In The Function Mode; Setting Parameters For Channels Using The Top Panel; Assigning Channels To Faders - Roland M-5000 Reference Manual

Fader Bank Section
Operation Procedures in the Function
Mode
The operation procedures in the Function mode are different for
when you're setting parameters of your choosing for a channel and
when you're assigning a channel of your choosing to a fader.
Setting Parameters for Channels Using the Top
Panel
1.
Press the [FUNC] button to turn it on (flashing).
All fader banks and assignable faders change to the Function
Selection mode. Selectable functions are shown on the fader
display.
2.
Press the [SEL] button to select the desired function.
The M-5000 switches to the mode for making the settings for the
selected function.
3.
Operate the fader bank to access the desired input
channel or output bus.
122
4.
Press the [SEL] button to set the parameters for the
desired input channel or output bus.
5.
Press the [FUNC] button to turn it off (dark).
The M-5000 exits the Function mode.

Assigning Channels to Faders

This changes assignments to the [USER 1] through [USER 3] layers
and to assignable faders.
1.
Press the [FUNC] button.
All fader banks and assignable fader sections change to the
Function Selection mode. Selectable functions are shown on the
fader display.
2.
Select "ASSIGN FADER". (Press the corresponding [SEL]
button.)
The M-5000 switches to the ASSIGN FADER mode.