About The Wireless Lan Function - Roland M-300 Owner's Manual Addendum

About the Wireless LAN Function

What is Wireless LAN Function?
By inserting the wireless USB Adapter (WNA1100-RL; sold separately) into the M-300's USB MEMORY port, you will be able to use
wireless-compatible applications (such as the "M-300 Remote" iPad app).
fig.wireless-connect.eps
iPad (M-480 Remote)
Wireless LAN
Items required to use the wireless LAN function
• Wireless USB Adapter (sold separately: WNA1100-RL)
• Wireless LAN access point (e.g., wireless LAN router. Not required if using in ad-hoc mode.)
• iPad with M-300 Remote app loaded.
You cannot connect multiple iPad units simultaneously.
Cautions About Wireless LAN Access Point
• The wireless LAN access point you use should support WPS.
• If your wireless LAN access point does not support WPS, you can connect using the procedure described in "Connecting to a Wireless LAN
Access Point That You Select" (p. 8).
• The ability to connect with any wireless LAN access points is not guaranteed.
• If you are unable to connect to the wireless LAN access point, try connecting using Ad-Hoc mode (p. 9).
Caution About M-300 RCS
While the wireless LAN function is enabled, it is not possible to connect with the M-300 RCS. The wireless LAN function is enabled
if "Enable Wireless LAN" is checked in the system setup screen (p. 5). If you are connecting the M-300 RCS, make sure the wireless
LAN function is disabled.
Wireless LAN access point
(e.g., wireless LAN router)
Wireless LAN
M-300
Wireless USB adaptor
(sold separately : WNA1100-RL)
3