Table of Contents
Advertisement
Video operations
Switching scenes in dual mode
Here are the steps when "Dual mode" (p. 10) is selected in the
system mode settings.
* Scene switching is always performed as a freeze-frame cut.
1.
Press the [HOME] button.
The multi-view PGM 1 screen is shown on the
left monitor, and the multi-view PGM 2 screen
is shown on the right monitor.
2.
In the preview area on the multi-view PGM 1/PGM 2
screens, touch the scenes you want to use for program
output.
The program scenes switch via freeze-frame cut.
A red border is shown around the program scenes.
MEMO
Scene link function
By using the scene link function, you can make the PGM 2 scene
switch at the same time as the PGM 1 scene.
For PGM 2, the same scene number as PGM 1 is automatically
selected.
* When you switch the scene for PGM 2, the link does not operate.
Touch <LINK> to turn the scene link function on/off.
12
Switching the scene bank
Each group of eight scenes is managed as a "bank". The VR-400UHD
features eight banks.
Switching by touching the screen
1.
Touch <BANK> on the multi-view screen.
The Bank Select window appears.
2.
Touch the bank you want to use.
This switches to the new bank.
3.
Touch <
> to close the Bank Select window.
MEMO
You can change the bank icon or bank name of the Bank Select
window.
Content
Changing the bank icon
Changing the bank name
Switching with the buttons
* In dual mode, the buttons only work for PGM 1.
1.
Press the [BANK] button to make it light up.
2.
Press the SCENE/BANK [1]–[8] buttons to select the bank.
This switches to the new bank.
The selected button lights up blue.
Operation
Touch the bank icon while holding down
the [EXIT/ALT] button.
Touch the bank name while holding
down the [EXIT/ALT] button.
Advertisement
Table of Contents
