Show System Login - Enterasys D2 D2G124-12P Cli Reference Manual

show system login

Use this command to display user login account information.
Syntax
show system login
Parameters
None.
Defaults
None.
Mode
Switch command, super user.
Example
This example shows how to display login account information. In this case, switch defaults have
not been changed:
D2(su)->show system login
Password history size: 0
Password aging
Username
admin
ro
rw
Table 2‐1 provides an explanation of the command output.
Table 2-1 show system login Output Details
Output Field
Password history size
Password aging
Username
Access
State
: disabled
Access State
super-user enabled
read-only enabled
read-write enabled
What It Displays...
Number of previously used user login passwords that will be checked for
duplication when the set password command is executed. Configured with
system password history (page
Number of days user passwords will remain valid before aging out. Configured
with set system password aging (page
Login user names.
Access assigned to this user account: super-user, read-write or read-only.
Whether this user account is enabled or disabled.
2-7).
2-6).
D-Series CLI Reference 2-3
show system login
set