Show Version; Show Version Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

show version

Example
This example shows how to clear the message of the day banner to a blank string:
D2(rw)->clear banner motd
show version
Use this command to display hardware and firmware information. Refer to "Downloading a
Firmware Image" on page 2‐33 for instructions on how to download a firmware image.
Syntax
show version
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display version information. Please note that you may see different
information displayed, depending on the type of hardware.
D2(su)->show version
Copyright (c) 2008 by Enterasys Networks, Inc.
Model
--------------
D2G124-12P
Table 2‐7 provides an explanation of the command output.
Table 2-7 show version Output Details
Output Field
Slot
Port
Model
Serial #
Versions
2-22 Basic Configuration
Serial #
----------------- -------------------
001188021035
What It Displays...
Module slot number (if applicable)
Number of ports supported.
Switch's model number.
Serial number of the switch.
• Hw: Hardware version number.
• Bp: BootPROM version.
• Fw: Current firmware version number.
• BuFw: Backup firmware version number.
Versions
Hw:BCM5665 REV 17
Bp:01.00.29
Fw: BuFw:03.01.13
1.0.xx