Table of Contents
Advertisement
show time
show time
Use this command to display the current time of day in the system clock.
Syntax
show time
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the current time. The output shows the day of the week,
month, day, and the time of day in hours, minutes, and seconds and the year:
D2(su)->show time
THU SEP 05 09:21:57 2002
set time
Use this command to change the time of day on the system clock.
Syntax
set time [mm/dd/yyyy] [hh:mm:ss]
Parameters
[mm/dd/yyyy]
[hh:mm:ss]
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the system clock to 7:50 a.m:
D2(su)->set time 7:50:00
2-16 Basic Configuration
Sets the time in:
month, day, year and/or
24‐hour format
At least one set of time parameters must be entered.
Hide quick links:
Advertisement
Table of Contents
