Set Snmp Group; Clear Snmp Group; Show Snmp Group Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

set snmp group

Table 5-21 show snmp group Output Details
Output Field
Security model
Security/user name
Group name
Storage type
Row status
set snmp group
Use this command to create an SNMP group. This associates SNMPv3 users to a group that shares
common access privileges.
Syntax
set snmp group groupname user user security-model {v1 | v2c | usm} [volatile |
nonvolatile]
Parameters
groupname
user user
security‐model v1 |
v2c | usm
volatile |
nonvolatile
Defaults
If storage type is not specified, nonvolatile storage will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to create an SNMP group called "anyone", assign a user named "public"
and assign SNMPv3 security to the group:
D2(su)->set snmp group anyone user public security-model usm

clear snmp group

Use this command to clear SNMP group settings globally or for a specific SNMP group and user.
Syntax
clear snmp group groupname user [security-model {v1 | v2c | usm}]
5-12 SNMP Configuration
What It Displays...
SNMP version associated with this group.
User belonging to the SNMP group.
Name of SNMP group.
Whether entry is stored in volatile, nonvolatile or read-only memory.
Status of this entry: active, notInService, or notReady.
Specifies an SNMP group name to create.
Specifies an SNMPv3 user name to assign to the group.
Specifies an SNMP security model to assign to the group.
(Optional) Specifies a storage type for SNMP entries associated with the
group.