Show Macauthentication; Show Macauthentication Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

show macauthentication

For information about...
clear macauthentication significant-bits
show macauthentication
Use this command to display MAC authentication information for one or more ports.
Syntax
show macauthentication [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, MAC authentication information will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC authentication information for
D2(su)->show macauthentication ge.2.1-8
MAC authentication:
MAC user password:
Port username significant bits
Port
-------
ge.2.1
ge.2.2
ge.2.3
ge.2.4
ge.2.5
ge.2.6
ge.2.7
ge.2.8
Table 15‐48 provides an explanation of the command output.
Table 15-48 show macauthentication Output Details
Output Field
MAC authentication
MAC user password
15-20 Security Configuration
(Optional) Displays MAC authentication information for specific port(s).
For a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐1.
Port Reauth
State Period
-------- ---------- -------- --------- -----------------
disabled 3600
disabled 3600
disabled 3600
disabled 3600
disabled 3600
disabled 3600
disabled 3600
disabled 3600
What It Displays...
Whether MAC authentication is globally enabled or disabled. Set using the set
macauthentication command as described in
page 15-22.
User password associated with MAC authentication on the device. Set using the set
macauthentication password command as described in
password" on page 15-23.
- enabled
- NOPASSWORD
- 48
Auth Auth Reauthentications
Allowed Allocated
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
1 1 disabled
Refer to page...
15-29
ge .2.1 through 8:
"set macauthentication" on
"set macauthentication