show port counters
Mode
Switch command, read‐only.
Examples
This example shows how to display all counter statistics, including MIB2 network traffic and
traffic through the device for
D2(su)->show port counters ge.3.1
Port: ge.3.1
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets
In Unicast Pkts
In Multicast Pkts
In Broadcast Pkts
In Discards
In Errors
Out Octets
Out Unicasts Pkts
Out Multicast Pkts
Out Broadcast Pkts
Out Errors
802.1Q Switch Counters
----------------------
Frames Received
Frames Transmitted
This example shows how to display all
device.
D2(su)->show port counters ge.3.1 switch
Port: ge.3.1
802.1Q Switch Counters
-----------------------
Frames Received
Frames Transmitted
Table
4‐12 provides an explanation of the command output.
Table 4-12 show port counters Output Details
Output Field
Port
MIB2 Interface
Bridge Port
4-6 Port Configuration
ge
.3.1:
MIB2 Interface: 1
ge
Bridge Port: 2
0
0
What It Displays...
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
MIB2 interface designation.
IEEE 802.1D bridge port designation.
0
0
0
0
0
0
0
0
0
0
0
0
0
.3.1 port counter statistics related to traffic through the
CLI" on page 4-1.