Show Gvrp; Show Garp Timer - Enterasys D2 D2G124-12P Cli Reference Manual

show gvrp

Use this command to display GVRP configuration information.
Syntax
show gvrp [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, GVRP configuration information will be displayed for all ports and
the device.
Mode
Switch command, read‐only.
Example
This example shows how to display GVRP status for the device and for fw.2.1:
D2(su)->show gvrp ge.2.1
Global GVRP status is enabled.
Port Number
-----------
ge.2.1

show garp timer

Use this command to display GARP timer values for one or more ports.
Syntax
show garp timer [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, GARP timer information will be displayed for all ports.
Mode
Switch command, read‐only.
(Optional) Displays GVRP configuration information for specific port(s). For
a detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐1.
GVRP status
-----------
disabled
(Optional) Displays GARP timer information for specific port(s). For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐1.
show gvrp
D-Series CLI Reference 7-21