Table of Contents
Advertisement
Table 15-48 show macauthentication Output Details (Continued)
Output Field
Port username
significant bits
Port
Port State
Reauth Period
Auth Allowed
Auth Allocated
Reauthentications
show macauthentication session
Use this command to display the active MAC authenticated sessions.
Syntax
show macauthentication session
Parameters
None.
Defaults
If port‐string is not specified, MAC session information will be displayed for all MAC
authentication ports.
Mode
Switch command, read‐only.
Usage
Changing the Reauth Period with the set macauthentication reauthperiod command does not
affect current sessions. New sessions display the correct period.
What It Displays...
Number of significant bits in the MAC addresses to be used starting with the left-
most bit of the vendor portion of the MAC address. The significant portion of the MAC
address is sent as a user-name credential when the primary attempt to authenticate
the full MAC address fails. Any other failure to authenticate the full address, (i.e.,
authentication server timeout) causes the next attempt to start once again with a full
MAC authentication. Default value of 48 can be changed with the set
macauthentication significant-bits command.
Port designation. For a detailed description of possible port-string values, refer to
"Port String Syntax Used in the
Whether or not MAC authentication is enabled or disabled on this port.
Reauthentication period for this port. Default value of 30 can be changed using the
set macauthentication reauthperiod command (page 15-28).
Number of concurrent authentications supported on this port. Default is 1 and cannot
be reset.
Maximum number of MAC authentications permitted on this port. Default is 1 and
cannot be reset
Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command (page 15-26).
show macauthentication session
CLI" on page 4-1.
D-Series CLI Reference 15-21
Hide quick links:
Advertisement
Table of Contents
