Show Ip Protocol; Set Ip Protocol - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

show ip protocol

Use this command to display the method used to acquire a network IP address for switch 
management.
Syntax
show ip protocol
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the method used to acquire a network IP address:
D2(su)->show ip protocol
System IP address acquisition method: dhcp

set ip protocol

Use this command to specify the protocol used to acquire a network IP address for switch 
management.
Syntax
set ip protocol {bootp | dhcp | none}
Parameters
bootp
dhcp
none
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the method used to acquire a network IP address to DHCP.
D2(su)->set ip protocol dhcp
Selects BOOTP as the protocol to use to acquire the system IP address.
Selects DHCP as the protocol to use to acquire the system IP address.
No protocol will be used to acquire the system IP address.
show ip protocol
D-Series CLI Reference 2-11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents