Show Sntp Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

show sntp
Example
This example shows how to display SNTP client settings:
D2(su)->show sntp
SNTP Version: 3
Current Time: TUE SEP 09 16:13:33 2003
Timezone: 'EST', offset from UTC is -4 hours and 0 minutes
Client Mode: unicast
Broadcast Count: 0
Poll Interval: 512 seconds
Poll Retry: 1
Poll Timeout: 5 seconds
SNTP Poll Requests: 1175
Last SNTP Update: TUE SEP 09 16:05:24 2003
Last SNTP Request: TUE SEP 09 16:05:24 2003
Last SNTP Status: Success
SNTP-Server
-------------------------------------------
10.2.8.6
144.111.29.19
Table 12‐41 provides an explanation of the command output.
Table 12-41 show sntp Output Details
Output Field
SNTP Version
Current Time
Timezone
Client Mode
Broadcast Count
Poll Interval
Poll Retry
Poll Timeout
SNTP Poll Requests Total number of SNTP poll requests.
Last SNTP Update
Last SNTP Request
Last SNTP Status
SNTP-Server
Precedence
Status
12-26 Logging and Network Management
Precedence Status
2 Active
1 Active
What It Displays...
SNTP version number.
Current time on the system clock.
Time zone name and amount it is offset from UTC (Universal Time).
Whether SNTP client is operating in unicast or broadcast mode. Set using set sntp
client command ("set sntp
Number of SNTP broadcast frames received.
Interval between SNTP unicast requests. Default of 512 seconds can be reset using
the set sntp poll-interval command
Number of poll retries to a unicast SNTP server. Default of 1 can be reset using the
set sntp poll-retry command
Timeout for a response to a unicast SNTP request. Default of 5 seconds can be
reset using set sntp poll-timeout command
Date and time of most recent SNTP update.
Date and time of most recent SNTP request.
Whether or not broadcast reception or unicast transmission and reception was
successful.
IP address(es) of SNTP server(s).
Precedence level of SNTP server in relation to its peers. Highest precedence is 1
and lowest is 10. Default of 1 can be reset using the set sntp server command
sntp server" on page 12-28).
Whether or not the SNTP server is active.
client" on page 12-27).
("set sntp poll-interval" on page 12-29).
("set sntp poll-retry" on page 12-29).
("set sntp poll-timeout" on page 12-30).
("set