Table of Contents
Advertisement
This chapter provides an overview of the D‐Series' unique features and functionality, an overview
of the tasks that may be accomplished using the CLI interface, an overview of ways to manage the
switch, factory default settings, and information about how to use the Command Line Interface to
configure the switch.
For information about...
D-Series CLI Overview
Switch Management Methods
Factory Default Settings
Using the Command Line Interface
D-Series CLI Overview
Enterasys Networks' D‐Series CLI interface allows you to perform a variety of network
management tasks, including the following:
•
Use CLI commands to perform network management and switch configuration operations.
•
Download a new firmware image.
•
Assign IP address and subnet mask.
•
Select a default gateway.
•
Establish and manage Virtual Local Area Networks (VLANs).
•
Establish and manage policy profiles and classifications.
•
Establish and manage priority classification.
•
Configure security protocols, including 802.1X and RADIUS, SSHv2, PWA, MAC locking, and
MAC authentication.
Switch Management Methods
The D‐Series switch can be managed using the following methods:
•
Locally using a VT type terminal connected to the console port.
•
Remotely using a VT type terminal connected through a modem.
•
Remotely using an SNMP management station.
•
In‐band through a Telnet connection.
•
In‐band using the Enterasys NetSight
®
management application.
1
Introduction
Refer to page...
1-1
1-1
1-2
1-5
D-Series CLI Reference 1-1
Hide quick links:
Advertisement
Table of Contents
