port‐string
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to set the port multiple authentication mode to required on
D2(rw)->set multiauth port mode auth-reqd ge.3.14
This example shows how to set the number of users allowed to authenticate on port
D2(rw)->set multiauth port numusers 8 ge.3.14
clear multiauth port
Use this command to clear multiple authentication properties for one or more ports.
Syntax
clear multiauth port {mode | numusers} port-string
Parameters
mode
numusers
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to clear the port multiple authentication mode on port
D2(rw)->clear multiauth port mode ge.3.14
This example shows how to clear the number of users on port
D2(rw)->clear multiauth port numusers ge.3.14
Specifies the port(s) on which to set multiple authentication properties.
Clears the specified port's multiple authentication mode.
Clears the value set for the number of users allowed authentication on the
specified port.
Specifies the port or ports on which to clear multiple authentication
properties.
clear multiauth port
ge
ge
ge
.3.14:
ge
.3.14:
D-Series CLI Reference 15-35
.3.14:
.3.14 to 8: