Checking The Leds; System Led; G3 System Leds (G3G124-24 Shown); System Led Definitions - Enterasys G3G124-24 Hardware Installation Manual

Checking the LEDs

Checking the LEDs
The following sections define the behavior of the LEDs on the G‐Series Ethernet switch chassis
and on the IOMs. Refer to Figure
Figure 3-1
1 Power Supply LEDs (PWR1 and PWR2)
2

SYSTEM LED

SYSTEM LED
The SYSTEM LED indicates the state of the system, as described in Table
Table 3-1 SYSTEM LED Definitions
Display
Off
Solid red
Blinking red
Solid amber
Blinking amber
Blinking green
Solid green
3-2 Troubleshooting
3‐1 for the location of the LEDs on the chassis and IOMs.

G3 system LEDs (G3G124-24 shown)

Status
No power.
Major system failure, including failure to boot.
Power on self-test failed.
Diagnostics are running.
Functional image is loaded.
System is booting.
System is fully operational.
3 IOM power off buttons (Slot 2, 3 and 4)
4 IOM power off status LEDs (Slot 2, 3 and 4)
3‐1.