Clear Dhcp Pool Domain-Name; Set Dhcp Pool Netbios-Name-Server - Enterasys D2 D2G124-12P Cli Reference Manual

clear dhcp pool domain-name

Syntax
set dhcp pool poolname domain-name domain
Parameters
poolname
domain
Defaults
None.
Mode
Switch command, read‐write.
Example
This example assigns the "mycompany.com" domain name to the address pool "auto1."
D2(rw)->set dhcp pool auto1 domain-name mycompany.com
clear dhcp pool domain-name
Use this command to remove the domain name from the address pool being configured.
Syntax
clear dhcp pool poolname domain-name
Parameters
poolname
Defaults
None.
Mode
Switch command, read‐write.
Example
This example removes the domain name from the address pool "auto1."
D2(rw)->clear dhcp pool auto1 domain-name

set dhcp pool netbios-name-server

Use this command to assign one or more NetBIOS name servers for the DHCP clients served by
the address pool being configured. Up to 8 NetBIOS name servers can be configured.
14-24 DHCP Server Configuration
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the domain name string. The domain name can be up to 255
characters in length.
Specifies the name of the address pool. Pool names may be up to 31
characters in length.