Set Arp; Show Arp Output Details - Enterasys D2 D2G124-12P Cli Reference Manual

set arp

Example
This example shows how to display the ARP table:
D2(su)->show arp
LINK LEVEL ARP TABLE
IP Address
-----------------------------------------------------
10.20.1.1
134.142.21.194
134.142.191.192
134.142.192.18
134.142.192.119
-----------------------------------------------------
Table 12‐39 provides an explanation of the command output.
Table 12-39 show arp Output Details
Output Field
IP Address
Phys Address
Flags
set arp
Use this command to add mapping entries to the switch's ARP table.
Syntax
set arp ip-address mac-address
Parameters
ip‐address
mac‐address
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to map IP address 192.168.219.232 to MAC address 00‐00‐0c‐40‐0f‐bc:
D2(su)->set arp 192.168.219.232 00-00-0c-40-0f-bc
12-16 Logging and Network Management
Phys Address Flags
00-00-5e-00-01-1 S
00-00-5e-00-01-1 S
00-00-5e-00-01-1 S
00-00-5e-00-01-1 S
00-00-5e-00-01-1 S
What It Displays...
IP address mapped to MAC address.
MAC address mapped to IP address.
Route status. Possible values and their definitions include:
S - manually configured entry (static)
P - respond to ARP requests for this entry
Specifies the IP address to map to the MAC address and add to the ARP
table.
Specifies the MAC address to map to the IP address and add to the ARP
table. The MAC address can be formatted as xx:xx:xx:xx:xx:xx or xx‐xx‐
xx‐xx‐xx‐xx.
Interface
host
host
host
host
host