Clear Sntp Poll-Retry; Set Sntp Poll-Timeout - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

clear sntp poll-retry

Parameters
retry
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the number of SNTP poll retries to 5:
D2(su)->set sntp poll-retry 5
clear sntp poll-retry
Use this command to clear the number of poll retries to a unicast SNTP server.
Syntax
clear sntp poll-retry
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the number of SNTP poll retries:
D2(su)->clear sntp poll-retry

set sntp poll-timeout

Use this command to set the poll timeout (in seconds) for a response to a unicast SNTP request.
Syntax
set sntp poll-timeout timeout
Parameters
timeout
Defaults
None.
12-30 Logging and Network Management
Specifies the number of retries. Valid values are 0 to 10.
Specifies the poll timeout in seconds. Valid values are 1 to 30. 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents