Set Port Enable; Show Port Alias - Enterasys D2 D2G124-12P Cli Reference Manual

set port enable

set port enable
Use this command to administratively enable one or more ports.
Syntax
set port enable port-string
Parameters
port‐string
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable
D2(su)->set port enable ge.1.3

show port alias

Use this command to display the alias name for one or more ports.
Syntax
show port alias [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, aliases for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display alias information for ports 1‐3 on slot 3:
D2(rw)->show port alias ge.3.1-3
Port
Port
Port
4-8 Port Configuration
Specifies the port(s) to enable. For a detailed description of possible port‐
string values, refer to "Port String Syntax Used in the CLI" on page 4‐1.
(Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐1.
ge.3.1 user
ge.3.2 user
ge.3.3 Admin
ge .1.3: