Clear Logging Server; Show Logging Default - Enterasys D2 D2G124-12P Cli Reference Manual

clear logging server

clear logging server
Use this command to remove a server from the Syslog server table.
Syntax
clear logging server index
Parameters
index
Defaults
None.
Mode
Switch command, read‐write.
Example
This command shows how to remove the Syslog server with index 1 from the server table:
D2(su)->clear logging server 1

show logging default

Use this command to display the Syslog server default values.
Syntax
show logging default
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This command shows how to display the Syslog server default values. For an explanation of the
command output, refer back to Table
D2(su)->show logging default
Defaults:
12-4 Logging and Network Management
Specifies the server table index number for the server to be removed.
Valid values are 1 ‐ 8.
Facility Severity
-----------------------------------------
local4 warning(5)
12‐36 on page 12‐2.
Port
514