Rename - Cisco ME 3400 Command Reference Manual

rename

rename
Use the rename boot loader command to rename a file.
Syntax Description
filesystem:
/source-file-url
/destination-file-url
Command Modes Boot loader
Command History Release
12.2(25)EX
Usage Guidelines Filenames and directory names are case sensitive.
Directory names are limited to 45 characters between the slashes (/); the name cannot contain control
characters, spaces, deletes, slashes, quotes, semicolons, or colons.
Filenames are limited to 45 characters; the name cannot contain control characters, spaces, deletes,
slashes, quotes, semicolons, or colons.
Examples This example shows a file named config.text being renamed to config1.text:
switch: rename flash:config.text flash:config1.text
You can verify that the file was renamed by entering the dir filesystem: boot loader command.
Related Commands Command
copy
Cisco ME 3400 Ethernet Access Switch Command Reference
A-16
rename filesystem:/source-file-url filesystem:/destination-file-url
Alias for a flash file system. Use flash: for the system board flash device.
Original path (directory) and filename.
New path (directory) and filename.
Modification
This command was introduced.
Description
Copies a file from a source to a destination.
Appendix A Cisco ME 3400 Ethernet Access Switch Boot Loader Commands
OL-9640-10