Http File Upload - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

HTTP File Upload

To display the HTTP File Upload page, click Maintenance
1. Use File Type to specify what type of file you want to upload:
• Archive - Specify archive (STK) code when you want to retrieve from the operational
flash:
• Image1 - Specify the code image1 when you want to retrieve.
• Image2 - Specify the code image2 when you want to retrieve.
• CLI Banner - Specify CLI Banner when you want retrieve the CLI banner file.
• Startup Configuration - Specify configuration when you want to retrieve the stored
configuration.
• Text Configuration - Specify configuration in text mode when you want to retrieve the
stored configuration.
• Script File - Specify script file when you want to retrieve the stored configuration.
• Error Log - Specify error log to retrieve the system error (persistent) log, sometimes
referred to as the event log.
• Trap Log - Specify trap log to retrieve the system trap records.
• Buffered Log - Specify buffered log to retrieve the system buffered (in-memory) log.
• Tech Support - Specify Tech Support to retrieve the switch information needed for
troubleshooting.
The factory default is Archive.
2. Use Local File Name to specify the local script file name you want to upload.
586 | Chapter 8. Maintenance
 
Upload HTTP File Upload.