Advanced - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

Advanced

The Advanced folder contains links to the following features:
• IP ACL on page 531
• IP Rules on page 533
• IP Extended Rules
• IPv6 ACL on page 538
• IPv6 Rules on page 539
• IP Binding Configuration
• IP Binding Table
IP ACL
An IP ACL consists of a set of rules which are matched sequentially against a packet. When
a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken
and the additional rules are not checked for a match. On this menu the interfaces to which an
IP ACL applies must be specified, as well as whether it applies to inbound or outbound traffic.
Rules for the IP ACL are specified/created using the IP ACL Rule Configuration menu.
To display the IP ACL page, click Security
The IP ACL area shows the current size of the ACL table versus the maximum size of the
ACL table. The current size is equal to the number of configured IPv4 plus the number of
configured MAC ACLs. The maximum size is 100.
on page 535
on page 542
on page 544
 
ACL> Advanced IP ACL.
Chapter 6. Managing Device Security | 531