Vlan Membership - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual

VLAN Membership

To display the VLAN Membership page, click Switching
Membership.
To configure VLAN membership:
1. Use VLAN ID to select the VLAN ID for which you want to display or configure data.
2. Use Group Operation to select all the ports and configure them:
• Untag All - Select all the ports on which all frames transmitted for this VLAN will be
untagged. All the ports will be included in the VLAN.
• Tag All - Select the ports on which all frames transmitted for this VLAN will be tagged.
All the ports will be included in the VLAN.
• Remove All - All the ports that may be dynamically registered in this VLAN via GVRP.
This selection has the effect of excluding all ports from the selected VLAN.
3. Use Port List to add the ports you selected to this VLAN. Each port has three modes:
• T(Tagged) - Select the ports on which all frames transmitted for this VLAN will be
tagged. The ports that are selected will be included in the VLAN.
• U(Untagged) - Select the ports on which all frames transmitted for this VLAN will be
untagged. The ports that are selected will be included in the VLAN.
• BLANK(Autodetect) - Select the ports that may be dynamically registered in this
VLAN via GVRP. This selection has the effect of excluding a port from the selected
VLAN.
136 | Chapter 3. Configuring Switching Information
  
VLAN Advanced VLAN