Ports - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
1. Use Search By to search for MAC Addresses by MAC Address, VLAN ID, and port.
• Searched by MAC Address - Select MAC Address from pull-down menu, enter the 6
byte hexadecimal MAC Address in two-digit groups separated by colons, for example
01:23:45:67:89:AB. Then click on the "Go" button. If the address exists, that entry will
be displayed as the first entry followed by the remaining (greater) mac addresses. An
exact match is required.
• Searched by VLAN ID - Select VLAN ID from pull-down menu, enter the VLAN ID, for
example 100. Then click on the "Go" button. If the address exists, the entry will be
displayed as the first entry followed by the remaining (greater) mac addresses.
• Searched by Port
Unit/Slot/Port, for example 2/1/1. Then click on the "Go" button. If the address exists,
the entry will be displayed as the first entry followed by the remaining (greater) mac
addresses.
Table 3-70.
Field
Total MAC Address
MAC Address
VLAN ID
Port
Status

Ports

The pages on the Ports tab allow you to view and monitor the physical port information for the
ports available on the switch. From the Ports link, you can access the following pages:
• Port Configuration
• Port Description
- Select Port from pull-down menu, enter the port ID in
on page 198
on page 200
Chapter 3. Configuring Switching Information
Description
Displaying the number of total MAC addresses
learned or configured.
A unicast MAC address for which the switch has
forwarding and/or filtering information. The format is
a 6 byte MAC Address that is separated by colons,
for example 01:23:45:67:89:AB.
The VLAN ID associated with the MAC Address.
The port upon which this address was learned.
The status of this entry. The meanings of the values
are:
•
Static: the value of the corresponding instance
was added by the system or a user and cannot be
relearned.
•
Learned: the value of the corresponding instance
was learned, and is being used.
• Management: the value of the corresponding
instance is also the value of an existing instance of
dot1dStaticAddress.
| 197