ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Service Interface Configuration
Use the Service Interface Configuration page to activate a policy on an interface.
To display the page, click QoS
To configure DiffServ policy settings on an interface:
1.
Use Interface to select the interface on which you will configure the DiffServer service.
2.
Policy Name - Lists all the policy names from which one can be selected. This field is not
shown for Read/Write users where inbound service policy attachment is not supported by
the platform.
Table 5-78.
Field
Direction
Operational Status
424 |
Chapter 5. Configuring Quality of Service
DiffServ
Advanced
Description
Shows that the traffic direction of this service
interface is In.
Shows the operational status of this service
interface, either Up or Down.
Service Interface Configuration.