ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Area Range Configuration
Use the Area Range Configuration page to configure OSPFv3 area ranges.
To display the Area Range Configuration page, click Routing
Range Configuration.
1.
Use Area ID to specify the area for which data is to be configured.
2.
Use IPv6 Prefix to enter the IPv6 Prefix/Prefix Length for the address range for the selected
area.
3.
Use LSDB Type to select the type of Link Advertisement associated with the specified area
and address range. The default type is 'Network Summary'.
4.
Use Advertise to select Enable or Disable. If you select Enable, the address range will be
advertised outside the area via a Network Summary LSA. The default is Enable.
5.
Click ADD to add the new address range to the switch.
6.
Click DELETE to remove the specified address range from the area configuration.
308 |
Chapter 4. Routing
OSPFv3
Advanced
Area