Http File Upload; Usb File Upload - NETGEAR XS728T ProSAFE Software Administration Manual

4. In the Transfer File Path field, specify the path on the TFTP server where you want to put
the file.
You can enter up to 32 characters. Include the slash or backslash at the end of the path.
A path name with a space is not accepted. Leave this field blank to save the file to the
root TFTP directory.
5. In the Transfer File Name field, specify a destination file name for the file to upload.
6. You can enter up to 32 characters. The transfer fails if you do not specify a file name. For a
code transfer, use the .ros file extension.
7. Select the Start File Transfer check box to enable the file upload when you click Apply
8. Click Apply to begin the file transfer (upload).
When the transfer actually begins, the bottom part of page Transfer Status displays
information about the progress of the file transfer. The screen refreshes automatically
until the file transfer completes or fails. Upon completion or failure of file transfer a
relevant message will be displayed.

HTTP File Upload

Use the HTTP File Upload screen to upload configuration text files from the switch to the
management system by using an HTTP session (for example, through your web browser).
To upload a file from the switch to another system by using HTTP:

1. Select Maintenance > Upload > HTTP File Upload.
2. The File Type list displays the type of file that can be uploaded, which is the Text
Configuration file.
3. Click Apply.
Upon completion of file transfer a relevant message is displayed.
A window appears to allow you to open the text file on the management system in order
to view or save it to the management system.

USB File Upload

Use the USB File Upload screen to upload files of various types from the switch to a USB
device connected to the USB port on the device front panel.
To display the USB File Upload page:

1. click Maintenance > Upload > USB File Upload.
2. Use File Type to specify what type of file you want to upload:
• Archive. Retrieve the active software image file.
• Text Configuration Retrieve the stored text configuration file. The factory default is
Archive.
3. Use File Path to enter the path to the destination path on USB to store file.
XS728T ProSAFE 28-Port 10-Gigabit L2+ Smart Switch
Maintenance
166