ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
1.
Class - Create classes and define class criteria.
2.
Policy - Create policies, associate classes with policies, and define policy statements.
3.
Service - Add a policy to an inbound interface
Packets are classified and processed based on defined criteria. The classification criteria is
defined by a class. The processing is defined by a policy's attributes. Policy attributes may be
defined on a per-class instance basis, and it is these attributes that are applied when a match
occurs. A policy can contain multiples classes. When the policy is active, the actions taken
depend on which class matches the packet.
Packet processing begins by testing the class match criteria for a packet. A policy is applied
to a packet when a class match within that policy is found.
The Differentiated Services menu page contains links to the various Diffserv configuration
and display features.
From the DiffServ link under the QoS tab, you can access the following pages:
•
DiffServ Wizard
•
Auto VoIP Configuration
•
Basic
on page 412
•
Advanced
on page 414
408 |
Chapter 5. Configuring Quality of Service
on page 409
on page 411