NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 445

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Enable Authentication List
You use this page to configure enable lists. A enable list specifies the authentication
method(s) you want to be used to validate privileged EXEC access for the users associated
with the list. The pre-configured users, admin and guest, are assigned to a pre-configured list
named defaultList, which you may not delete. All newly created users are also assigned to
the defaultList until you specifically assign them to a different list.

To display the Enable Authentication List page, click Security Management Security >

Authentication List Enable Authentication List.
Chapter 6. Managing Device Security | 445