NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 383

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
PIM-SM BSR Candidate Configuration
To display the IPv6 PIM-SM BSR Candidate Configuration page, click Routing

Multicast PIM-SM
1. Use Interface to select the interface for which data is to be configured.
2. Use Priority to enter the priority of C-BSR.
3. Use Hash Mask Length to enter the C-BSR hash mask length to be advertised in bootstrap
messages. This hash mask length will be used in the hash algorithm for selecting the RP for
a particular group. The valid values are from 0 to 128. Default value is 126.
Table 75.
Field
IP Address
Next bootstrap Message
Next Candidate RP Advertisement

BSR Candidate Configuration.
Description
Displays the IP address of the Elected BSR.
Time (in hours, minutes, and seconds) in which the
next bootstrap message is due from this BSR.
Time (in hours, minutes, and seconds) in which the
next candidate RP advertisement will be sent.

IPv6
Chapter 4. Routing | 383