NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 449

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
HTTPS Authentication List
You use this page to configure HTTPS lists. A login list specifies the authentication
method(s) you want used to validate switch or port access through HTTPS for the users
associated with the list.
To display the HTTPS Authentication List page, click Security
Authentication List
1. List Name - Select the HTTPS list name for which you want to configure data.
2. Use the dropdown menu to select the method that should appear first in the selected
authentication login list. If you select a method that does not time out as the first method,
such as 'local' no other method will be tried, even if you have specified more than one
method. The options are:
• Local -The user's locally stored ID and password will be used for authentication.
• Radius - The user's ID and password will be authenticated using the RADIUS server
instead of locally.
• Tacacs - The user's ID and password will be authenticated using the TACACS+
server.
• None - The user will not be authenticated.
3. Use the dropdown menu to select the method, if any, that should appear second in the
selected authentication login list. This is the method that will be used if the first method times
out. If you select a method that does not time out as the second method, the third method
will not be tried. Note that this parameter will not appear when you first create a new login
list.
4. Use the dropdown menu to select the method, if any, that should appear third in the selected
authentication login list.
5. Use the dropdown menu to select the method, if any, that should appear forth in the selected
authentication login list.

HTTPS Authentication List.

Management Security >
Chapter 6. Managing Device Security | 449