Mld Groups - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Click REFRESH to refresh the data on the screen with the latest MLD routing interface
statistics.

MLD Groups

To display the MLD Groups page, click Routing
Table 78.
Field
Interface
Group IP
Last Reporter
Up Time
Expiry Time
Filter Mode
Version1 Host Timer
Group Compat Mode
 
IPv6 Multicast MLD
Description
Indicates the interface on which data is displayed.
Indicates the address of the Mgmd members.
The IP Address of the source of the last membership
report received for this multicast group address on
the interface.
Time elapsed in seconds since the multicast group
has been known.
Time left in seconds before the entry is removed
from the MLD membership table of this interface.
The filter mode of the multicast group on this
interface. The values it can take are INCLUDE and
EXCLUDE.
The time remaining until the router assumes there
are no longer any MLD version-1 Hosts on the
specified interface.
The compatibility mode of the multicast group on the
interface. The values it can take are MLDv1 and
MLDv2.

MLD Groups.
Chapter 4. Routing | 389