Http File Upload - NETGEAR ProSafe XS728T User Manual

ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
7. From the Server Address Type menu, select the format for the Server Address field:
• IPv4. Indicates that the TFTP server address is an IP address in dotted-decimal
format. This is the default setting.
• DNS. Indicates that the TFTP server address is a host name.
8. In the TFTP Server IP field, enter the IP address of the server in accordance with the format
indicated by the server address type.
9. In the Transfer File Path field, specify the path on the TFTP server where you want to save
the file.
You can enter up to 32 characters. Include the backslash at the end of the path. A path
name with a space is not accepted. Leave this field blank to save the file to the root TFTP
directory.
10. In the Remote File Name field, specify a name for the file to be uploaded.
You can enter up to 32 characters. The transfer fails if you do not specify a file name. For
an archive transfer, use a .bin file extension.
11. Select the Start File Transfer check box to enable the file transfer.
12. Click the Apply button.
The file transfer begins.
The page displays information about the file transfer progress. The page refreshes
automatically when the file transfer completes (or if it fails).

HTTP File Upload

Use the HTTP File Upload page to upload files of various types from the switch to the
management system through an HTTP session by using your web browser.

To upload a file from the switch to another system by using HTTP:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Maintenance > Upload > HTTP File Upload.
Change the Default IP Address of the
Maintenance
334