Dhcp Snooping Global Configuration - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Prosafe gigabit l3 managed switch web management user manual
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- Software administration manual (562 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
DHCP Snooping Global Configuration
To display the DHCP Snooping Global Configuration page, click Security
Snooping
Global Configuration.
DHCP Snooping Configuration
1.
Use DHCP Snooping Mode to enable or disable the DHCP Snooping feature. The
factory default is disabled.
2.
Use MAC Address Validation to enable or disable the validation of sender MAC Address
for DHCP Snooping. The factory default is enabled.
DHCP Snooping VLAN Configuration
1.
Use VLAN ID to enter the VLAN for which the DHCP Snooping Mode is to be enabled.
2.
Use DHCP Snooping Mode to enable or disable the DHCP Snooping feature for entered
VLAN. The factory default is disabled.
3.
Click APPLY to apply the new configuration and cause the changes to take effect. These
changes will not be retained across a power cycle unless a save configuration is performed.
498 |
Chapter 6. Managing Device Security
Control> DHCP
- Quick Links:
- Web Access
- Factory Default
Hide quick links:
Advertisement
Chapters
Table of Contents
