Dhcp L2 Relay Interface Configuration - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual
Prosafe gigabit l3 managed switch web management user manual
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- Software administration manual (562 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
DHCP L2 Relay Interface Configuration
To display the DHCP L2 Relay Interface Configuration page, click System > Services >
DHCP L2 Relay> DHCP L2 Relay Interface Configuration. A screen similar to the following
displays.
1.
Use Admin Mode to enable or disable the DHCP L2 Relay on the selected interface.
Default is disable.
2.
Use 82 Option Trust Mode to enable or disable an interface to be trusted for DHCP L2
Relay (Option-82) received.
Chapter 2. Configuring System Information
| 65
- Quick Links:
- Web Access
- Factory Default
Hide quick links:
Advertisement
Chapters
Table of Contents
