ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
IP DSCP to Queue Mapping
Use the IP DSCP to Queue Mapping page to specify which internal traffic class to map the
corresponding DSCP value.
To display the IP DSCP Queue Mapping page, click QoS
Queue Mapping.
To map DSCP values to queues:
1.
Use Interface to specify CoS configuration settings based per-interface or specify all
CoS configurable interfaces.
2.
The IP DSCP field displays an IP DSCP value from 0 to 63.
3.
For each DSCP value, specify which internal traffic class to map the corresponding IP
DSCP value. The queue number depends on specific hardware.
4.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5.
If you make changes to the page, click Apply to apply the changes to the system.
CoS
Advanced
Chapter 5. Configuring Quality of Service
IP DSCP to
| 403