ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
VRRP Secondary IP
To display the VRRP Secondary IP page, click Routing
Secondary IP.
1.
Use VRRP ID and Interface to select one of the existing Virtual Routers, listed by
interface number and VRRP ID.
2.
Use Secondary IP Address to enter the IP address for the interface. This address must be
a member of one of the subnets currently configured on the interface. This value is read only
once configured.
3.
Click ADD to add a new secondary IP address to the selected VRRP interface.
4.
Click DELETE to delete the selected secondary IP address.
Table 48.
Field
Virtual Router ID
Primary IP Address
VRRP
Advanced
Description
The Virtual Router ID for which data is to be
displayed or configured.
The Primary IP Address of the Virtual Router.
VRRP
Chapter 4. Routing
| 331