NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 277

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
8. Click DELETE to delete the NSSA area designation. The area will be returned to normal
state.
Table 31.
Field
SPF Runs
Area Border Router Count
Area LSA Count
Area LSA Checksum
Translator State
Description
The number of times that the intra-area route table
has been calculated using this area's link-state
database. This is typically done using Dijkstra's
algorithm.
The total number of area border routers reachable
within this area. This is initially zero, and is
calculated in each SPF Pass.
The total number of link-state advertisements in this
area's link-state database, excluding AS External
LSAs.
The 32-bit unsigned sum of the link-state
advertisements' LS checksums contained in this
area's link-state database. This sum excludes
external (LS type 5) link-state advertisements. The
sum can be used to determine if there has been a
change in a router's link state database, and to
compare the link-state database of two routers.
The field tells you if and how the NSSA border router
translates type-7 into type-5:
•
enabled: The NSSA border router's translator
role has been set to always.
•
elected: The candidate NSSA border router is
translating type-7 LSAs into type-5.
•
disabled: The candidate NSSA border router is
NOT translating type-7 LSAs into type-5.
Chapter 4. Routing | 277