NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 352

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Table 60.
Field
Interface
Multicast Group IP
Last Reporter
Up Time
Expiry Time
Version 1 Host Timer
Version 2 Host Timer
Compatibility
Filter Mode
Click REFRESH to refresh the data on the screen with latest IGMP groups information.
352 | Chapter 4. Routing
Description
The interface which data is to be displayed.
The IP multicast group address for which data is to
be displayed.
The IP address of the source of the last membership
report received for the IP Multicast group address on
the selected interface.
The time elapsed since this entry was created.
The minimum amount of time remaining before this
entry will be aged out.
The time remaining until the local router will assume
that there are no longer any IGMP version 1
members on the IP subnet attached to this interface.
When an IGMPv1 membership report is received,
this timer is reset to the group membership timer.
While this timer is non-zero, the local router ignores
any IGMPv2 leave messages for this group that it
receives on the selected interface. This field is
displayed only if the interface is configured for IGMP
version 1.
The time remaining until the local router will assume
that there are no longer any IGMP version 2
members on the IP subnet attached to this interface.
When an IGMPv2 membership report is received,
this timer is reset to the group membership timer.
While this timer is non-zero, the local router ignores
any IGMPv1 and IGMPv3 leave messages for this
group that it receives on the selected interface. This
field is displayed only if the interface is configured for
IGMP version 2.
This parameter shows group compatibility mode(v1,
v2 and v3) for this group on the specified interface.
The source filter mode (Include/Exclude/NA) for the
specified group on this interface. When NA mode is
active the field is blank