NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 555

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Table 7-112.
Field
Packets Transmitted 64
Octets
Packets Transmitted 65-127
Octets
Packets Transmitted 128-255
Octets
Packets Transmitted 256-511
Octets
Packets Transmitted
512-1023 Octets
Packets Transmitted
1024-1518 Octets
Packets Transmitted > 1518
Octets
Maximum Frame Size
Total Packets Transmitted
Successfully
Unicast Packets Transmitted
Multicast Packets
Transmitted
Broadcast Packets
Transmitted
Total Transmit Errors
Tx FCS Errors
Underrun Errors
Description
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets transmitted that were longer than 1518 octets
(excluding framing bits, but including FCS octets) and were otherwise well
formed. This counter has a max increment rate of 815 counts per sec at 10
Mb/s.
The maximum ethernet frame size the interface supports or is configured,
including ethernet header, CRC, and payload. (1518 to 9216). The default
maximum frame size is 1518.
The number of frames that have been transmitted by this port to its segment.
The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that were
discarded or not sent.
The total number of packets that higher-level protocols requested be
transmitted to a Multicast address, including those that were discarded or
not sent.
The total number of packets that higher-level protocols requested be
transmitted to the Broadcast address, including those that were discarded or
not sent.
The sum of Single, Multiple, and Excessive Collisions.
The total number of packets transmitted that had a length (excluding framing
bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but
had a bad Frame Check Sequence (FCS) with an integral number of octets
The total number of frames discarded because the transmit FIFO buffer
became empty during frame transmission.
Chapter 7. Monitoring the System | 555