Troubleshooting; Ping Ipv4 - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Table 8-122.
Field
Image Name
Active Image
Version

Troubleshooting

The Troubleshooting menu contains links to the following options:
•

Ping IPv4

on page 595
• Ping IPv6 on page 598
• Traceroute IPv4
• Traceroute IPv6
Ping IPv4
Use this screen to tell the switch to send a Ping request to a specified IP address. You can
use this to check whether the switch can communicate with a particular IP station. Once you
click the APPLY button, the switch will send specified number of ping requests and the
results will be displayed.
If a reply to the ping is not received, you will see:
• Tx = Count, Rx = 0 Min/Max/Avg RTT = 0/0/0 msec
If a reply to the ping is received, you will see:
• Received response for Seq Num 0 Rtt xyz usec
• Received response for Seq Num 1 Rtt abc usec
• Received response for Seq Num 2 Rtt def usec
• Tx = Count, Rx = Count Min/Max/Avg RTT = xyz/abc/def msec.
To access the Ping IPv4 page, click Maintenance
on page 599
on page 601
Description
This displays the image name for the selected unit.
Displays the current active image of the selected
unit.
Displays the version of the image1 code file.

Troubleshooting
Chapter 8. Maintenance

Ping IPv4.
| 595