NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch User Manual page 369

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
PIM-SM Static RP Configuration
This page is used to statically configure the RP address for one or more multicast groups.
To display the PIM-SM Static RP Configuration page, click Routing
Static RP Configuration.
1. Use RP Address to specify the IP Address of the RP to be created or deleted.
2. Use Group Address to specify the Group Address of the RP to be created or deleted.
3. Use Group Mask to specify the Group Mask of the RP to be created or deleted.
4. Use Override to indicate that if there is a conflict, the RP configured with this option prevails
over the RP learned by BSR.
5. Click ADD to add a new static RP address for one or more multicast groups.
6. Click DELETE to delete the RP address selected.
  
Multicast PIM-SM
Chapter 4. Routing | 369