ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
HTTP
From the HTTP link, you can access the following pages:
•
HTTP Configuration
HTTP Configuration
To access the switch over a web you must first configure it with IP information (IP address,
subnet mask, and default gateway). You can configure the IP information using any of the
following:
•
BOOTP
•
DHCP
•
Terminal interface via the EIA-232 port
Once you have established in-band connectivity, you can change the IP information using a
Web-based management.
on page 451
Chapter 6. Managing Device Security
| 451